dmesg - primeiro teste
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000913ff] usable
BIOS-e820: [mem 0x0000000000091400-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000ace3efff] usable
BIOS-e820: [mem 0x00000000ace3f000-0x00000000acebefff] reserved
BIOS-e820: [mem 0x00000000acebf000-0x00000000acfbefff] ACPI NVS
BIOS-e820: [mem 0x00000000acfbf000-0x00000000acffefff] ACPI data
BIOS-e820: [mem 0x00000000acfff000-0x00000000acffffff] usable
BIOS-e820: [mem 0x00000000ad000000-0x00000000af9fffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ffd80000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000024fdfffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Hewlett-Packard HP Pavilion dm4 Notebook PC/1793, BIOS F.08 01/17/2012
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x24fe00 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E7FFF write-protect
E8000-EFFFF write-combining
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0AD000000 mask FFF000000 uncachable
3 base 0AE000000 mask FFE000000 uncachable
4 base 0B0000000 mask FF0000000 uncachable
5 base 0FFC00000 mask FFFC00000 write-protect
6 base 100000000 mask F00000000 write-back
7 base 200000000 mask FC0000000 write-back
8 base 240000000 mask FF0000000 write-back
9 base 24FE00000 mask FFFE00000 uncachable
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0xad000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff88000008b000] 8b000 size 24576
reserving inaccessible SNB gfx pages
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x24fc00000-0x24fdfffff]
[mem 0x24fc00000-0x24fdfffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x24c000000-0x24fbfffff]
[mem 0x24c000000-0x24fbfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x24bffffff]
[mem 0x200000000-0x24bffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xace3efff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xacdfffff] page 2M
[mem 0xace00000-0xace3efff] page 4k
init_memory_mapping: [mem 0xacfff000-0xacffffff]
[mem 0xacfff000-0xacffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[mem 0x100000000-0x1ffffffff] page 2M
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
RAMDISK: [mem 0x35b5e000-0x36da6fff]
ACPI: RSDP 00000000000fe020 000024 (v02 HPQOEM)
ACPI: XSDT 00000000acffe120 000084 (v01 HPQOEM SLIC-MPC 00000001 01000013)
ACPI: FACP 00000000acffc000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: DSDT 00000000acfe8000 01085E (v01 HP INSYDE 00000000 MSFT 01000013)
ACPI: FACS 00000000acf6b000 000040
ACPI: ASF! 00000000acffd000 0000A5 (v32 HP INSYDE 00000001 MSFT 01000013)
ACPI: HPET 00000000acffb000 000038 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: APIC 00000000acffa000 00008C (v02 HP INSYDE 00000001 MSFT 01000013)
ACPI: MCFG 00000000acff9000 00003C (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: SLIC 00000000acfe7000 000176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
ACPI: WDAT 00000000acfe6000 000224 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: SSDT 00000000acfe4000 001068 (v01 HP INSYDE 00001000 MSFT 01000013)
ACPI: BOOT 00000000acfe2000 000028 (v01 HP INSYDE 00000001 MSFT 01000013)
ACPI: ASPT 00000000acfdf000 000034 (v07 HP INSYDE 00000001 MSFT 01000013)
ACPI: SSDT 00000000acfde000 000804 (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: SSDT 00000000acfdd000 000996 (v01 HP INSYDE 00003000 INTL 20100121)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000024fdfffff]
Initmem setup node 0 [mem 0x00000000-0x24fdfffff]
NODE_DATA [mem 0x24fdf5000-0x24fdf9fff]
[ffffea0000000000-ffffea00093fffff] PMD -> [ffff880247400000-ffff88024f3fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x24fdfffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00090fff]
node 0: [mem 0x00100000-0xace3efff]
node 0: [mem 0xacfff000-0xacffffff]
node 0: [mem 0x100000000-0x24fdfffff]
On node 0 totalpages: 2083792
DMA zone: 64 pages used for memmap
DMA zone: 144 pages reserved
DMA zone: 3984 pages, LIFO batch:0
DMA32 zone: 11001 pages used for memmap
DMA32 zone: 704064 pages, LIFO batch:31
Normal zone: 21496 pages used for memmap
Normal zone: 1375744 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x00091000-0x00091fff]
PM: Registered nosave memory: [mem 0x00092000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xace3f000-0xacebefff]
PM: Registered nosave memory: [mem 0xacebf000-0xacfbefff]
PM: Registered nosave memory: [mem 0xacfbf000-0xacffefff]
PM: Registered nosave memory: [mem 0xad000000-0xaf9fffff]
PM: Registered nosave memory: [mem 0xafa00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff]
PM: Registered nosave memory: [mem 0xffd80000-0xffffffff]
e820: [mem 0xafa00000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88024fa00000 s86400 r8192 d24192 u262144
pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2051087
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 8101216K/8335168K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 233952K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2394.501 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.00 BogoMIPS (lpj=9578004)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring handled by SMI
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 5
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (fam: 06, model: 2a, stepping: 07)
TSC deadline timer enabled
Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata, please upgrade microcode
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
CPU2: Thermal monitoring handled by SMI
CPU3: Thermal monitoring handled by SMI
.... node #0, CPUs: #1 #2 #3
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19156.00 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xacebf000-0xacfbefff] (1048576 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 19:26:54, date: 10/29/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI Error: No handler for Region [RAM_] (ffff8802440d4f30) [EmbeddedControl] (20131115/evregion-162)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20131115/exfldio-299)
ACPI Error: Method parse/execution failed [\_SB_.ACCL._STA] (Node ffff8802440dce88), AE_NOT_EXIST (20131115/psparse-536)
ACPI Error: Method execution failed [\_SB_.ACCL._STA] (Node ffff8802440dce88), AE_NOT_EXIST (20131115/uteval-103)
ACPI: SSDT 00000000ace70798 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
ACPI: SSDT 00000000ace71a98 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000303 (v01 PmRef ApIst 00003000 INTL 20100121)
ACPI: SSDT 00000000ace6fd98 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20100121)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: ACPI Dock Station Driver: 1 docks/bays found
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfeafffff]
pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
pci 0000:00:02.0: [8086:0116] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xc0804000-0xc080400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xc0809000-0xc08093ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xc0800000-0xc0803fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:1c16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:1c18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xc0808000-0xc08083ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:1c4b] type 00 class 0x060100
pci 0000:00:1f.2: [8086:282a] type 00 class 0x010400
pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
pci 0000:00:1f.2: reg 0x24: [mem 0xc0807000-0xc08077ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xc0805000-0xc08050ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:0886] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xc0700000-0xc0701fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xc0700000-0xc07fffff]
pci 0000:03:00.0: [10ec:5209] type 00 class 0xff0000
pci 0000:03:00.0: reg 0x10: [mem 0xc0600000-0xc0600fff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc06fffff]
pci 0000:04:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [io 0x2000-0x20ff]
pci 0000:04:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref]
pci 0000:04:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:05:00.0: [1033:0194] type 00 class 0x0c0330
pci 0000:05:00.0: reg 0x10: [mem 0xc0500000-0xc0501fff 64bit]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
ACPI: Enabled 5 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00091400-0x0009ffff]
e820: reserve RAM buffer [mem 0xace3f000-0xafffffff]
e820: reserve RAM buffer [mem 0xad000000-0xafffffff]
e820: reserve RAM buffer [mem 0x24fe00000-0x24fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: [dma 4]
pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:01: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
system 00:04: [io 0x1000-0x100f] has been reserved
system 00:04: [io 0x1010-0x1013] has been reserved
system 00:04: [io 0xffff] has been reserved
system 00:04: [io 0x0400-0x0453] could not be reserved
system 00:04: [io 0x0458-0x047f] has been reserved
system 00:04: [io 0x0500-0x057f] has been reserved
system 00:04: [mem 0xfe800000-0xfe80ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io 0x0454-0x0457] has been reserved
system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:08: Plug and Play ACPI device, IDs SYN1e57 SYN1e00 SYN0002 PNP0f13 (active)
system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:09: [mem 0xe0000000-0xefffffff] has been reserved
system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:09: [mem 0xafa00000-0xafa00fff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x20000000-0x201fffff] could not be reserved
system 00:0a: [mem 0x40000000-0x401fffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: Plug and Play ACPI device, IDs HPQ0004 (active)
pnp: PnP ACPI: found 12 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [mem 0xc0700000-0xc07fffff]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [mem 0xc0600000-0xc06fffff]
pci 0000:00:1c.3: PCI bridge to [bus 04]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [mem 0xc0500000-0xc05fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xafa00000-0xfeafffff]
pci_bus 0000:02: resource 1 [mem 0xc0700000-0xc07fffff]
pci_bus 0000:03: resource 1 [mem 0xc0600000-0xc06fffff]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]
pci_bus 0000:05: resource 1 [mem 0xc0500000-0xc05fffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18724K (ffff880035b5e000 - ffff880036da7000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xa8e3f000-0xace3f000] (64MB) mapped at [ffff8800a8e3f000-ffff8800ace3efff]
Simple Boot Flag at 0x44 set to 0x1
microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x25
microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x25
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1414610815.024:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15859
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010e80000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x21120
intel_idle: v0.4 model 0x2A
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: AC Adapter [ADP1] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZS0] (78 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZS1] (51 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xc0809000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xc0808000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:05:00.0: irq 40 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 41 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 42 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:05:00.0: irq 44 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
usb usb3: SerialNumber: 0000:05:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
xhci_hcd 0000:05:00.0: xHCI Host Controller
xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.13.0-37-generic xhci_hcd
usb usb4: SerialNumber: 0000:05:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:05: alarms up to one month, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:595:446
rtc_cmos 00:05: setting system clock to 2014-10-29 19:26:55 UTC (1414610815)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[124]: starting version 204
rtsx_pci 0000:03:00.0: irq 45 for MSI/MSI-X
rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 45
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control
r8169 0000:04:00.0: irq 46 for MSI/MSI-X
r8169 0000:04:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c72000, 10:1f:74:6a:1c:5d, XID 0c900800 IRQ 46
r8169 0000:04:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
usb 1-1: new high-speed USB device number 2 using ehci-pci
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl RAID mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: DUMMY
ata2: SATA max UDMA/133 abar m2048@0xc0807000 port 0xc0807180 irq 47
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xc0807000 port 0xc0807300 irq 47
ata6: DUMMY
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
random: nonblocking pool is initialized
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: TOSHIBA MK6476GSX, GS001C, max UDMA/100
ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata2.00: configured for UDMA/100
scsi 1:0:0:0: Direct-Access ATA TOSHIBA MK6476GS GS00 PQ: 0 ANSI: 5
sd 1:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 1:0:0:0: Attached scsi generic sg0 type 0
ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5.00: ATAPI: hp DVDRAM GU60N, MU02, max UDMA/100
ata5.00: configured for UDMA/100
scsi 4:0:0:0: CD-ROM hp DVDRAM GU60N MU02 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 24x/8x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 4:0:0:0: Attached scsi CD-ROM sr0
sr 4:0:0:0: Attached scsi generic sg1 type 5
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sda: sda1 sda2 < sda5 >
sd 1:0:0:0: [sda] Attached SCSI disk
tsc: Refined TSC clocksource calibration: 2394.562 MHz
usb 3-1: new low-speed USB device number 2 using xhci_hcd
usb 3-1: New USB device found, idVendor=1a2c, idProduct=0b23
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Keyboard
usb 3-1: Manufacturer: USB
usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb3/3-1/3-1:1.0/input/input5
hid-generic 0003:1A2C:0B23.0001: input,hidraw0: USB HID v1.10 Keyboard [USB USB Keyboard] on usb-0000:05:00.0-1/input0
input: USB USB Keyboard as /devices/pci0000:00/0000:00:1c.4/0000:05:00.0/usb3/3-1/3-1:1.1/input/input6
hid-generic 0003:1A2C:0B23.0002: input,hidraw1: USB HID v1.10 Mouse [USB USB Keyboard] on usb-0000:05:00.0-1/input1
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
irq 16: nobody cared (try booting with the "irqpoll" option)
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.13.0-37-generic #64-Ubuntu
Hardware name: Hewlett-Packard HP Pavilion dm4 Notebook PC/1793, BIOS F.08 01/17/2012
ffff880243ea88a4 ffff88024fa03e68 ffffffff8171ed09 ffff880243ea8800
ffff88024fa03e90 ffffffff810c1be2 ffff880243ea8800 0000000000000010
0000000000000000 ffff88024fa03ed0 ffffffff810c211c 0000000000000010
Call Trace:
[] dump_stack+0x45/0x56
[] __report_bad_irq+0x32/0xd0
[] note_interrupt+0x24c/0x2a0
[] handle_irq_event_percpu+0xd9/0x1d0
[] handle_irq_event+0x3d/0x60
[] handle_fasteoi_irq+0x5a/0x100
[] handle_irq+0x1e/0x30
[] do_IRQ+0x4d/0xc0
[] common_interrupt+0x6d/0x6d
[] ? poll_idle+0x49/0x90
[] ? poll_idle+0x18/0x90
[] cpuidle_enter_state+0x40/0xc0
[] cpuidle_idle_call+0xb9/0x1f0
[] arch_cpu_idle+0xe/0x30
[] cpu_startup_entry+0xc5/0x290
[] rest_init+0x77/0x80
[] start_kernel+0x438/0x443
[] ? repair_env_string+0x5c/0x5c
[] ? early_idt_handlers+0x120/0x120
[] x86_64_start_reservations+0x2a/0x2c
[] x86_64_start_kernel+0x143/0x152
handlers:
[] usb_hcd_irq
Disabling IRQ #16
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x22c00, board id: 1910, fw id: 851366
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input4
usb 1-1.4: New USB device found, idVendor=8087, idProduct=07d7
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Intel(R) Centrino(R) Wireless-N + WiMAX 6150
usb 1-1.4: Manufacturer: Intel Corporation
Switched to clocksource tsc
usb 1-1.5: new high-speed USB device number 4 using ehci-pci
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 17 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.5: New USB device found, idVendor=064e, idProduct=e258
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.5: Product: HP TrueVision HD
usb 1-1.5: Manufacturer: SuYin
usb 1-1.5: SerialNumber: HF1016-A821-OV01-VH-R01.01.00
usb 2-1.2: new low-speed USB device number 3 using ehci-pci
usb 2-1.2: New USB device found, idVendor=1bcf, idProduct=0005
usb 2-1.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 2-1.2: Product: USB Optical Mouse
input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input7
hid-generic 0003:1BCF:0005.0003: input,hidraw2: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1.2/input0
usb 2-1.3: new full-speed USB device number 4 using ehci-pci
usb 2-1.3: New USB device found, idVendor=08ff, idProduct=2665
usb 2-1.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.3: Product: Fingerprint Sensor
usb 2-1.4: new full-speed USB device number 5 using ehci-pci
usb 2-1.4: New USB device found, idVendor=0a5c, idProduct=21e1
usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.4: Product: BCM20702A0
usb 2-1.4: Manufacturer: Broadcom Corp
usb 2-1.4: SerialNumber: 64273783A61A
Adding 8334332k swap on /dev/sda5. Priority:-1 extents:1 across:8334332k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[305]: starting version 204
hp_accel: laptop model unknown, using default axes configuration
mei_me 0000:00:16.0: irq 48 for MSI/MSI-X
[drm] Initialized drm 1.1.0 20060810
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000540-0x000000000000054f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000530-0x000000000000053f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \GPIO 1 (20131115/utaddress-251)
ACPI Warning: 0x0000000000000500-0x000000000000052f SystemIO conflicts with Region \_SB_.GPIO 2 (20131115/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
cfg80211: Calling CRDA to update world regulatory domain
lis3lv02d: 8 bits 3DC sensor found
[drm] Memory usable by graphics device = 2048M
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
Intel(R) Wireless WiFi driver for Linux, in-tree:
Copyright(c) 2003-2013 Intel Corporation
iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
iwlwifi 0000:02:00.0: irq 49 for MSI/MSI-X
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
i915 0000:00:02.0: irq 50 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input8
wmi: Mapper loaded
[drm] Wrong MCH_SSKPD value: 0x16040307
[drm] This can cause pipe underruns and display issues.
[drm] Please upgrade your BIOS to fix this.
type=1400 audit(1414610839.564:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=414 comm="apparmor_parser"
type=1400 audit(1414610839.564:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=414 comm="apparmor_parser"
type=1400 audit(1414610839.564:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=414 comm="apparmor_parser"
type=1400 audit(1414610839.564:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=414 comm="apparmor_parser"
type=1400 audit(1414610839.564:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=414 comm="apparmor_parser"
type=1400 audit(1414610839.564:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=414 comm="apparmor_parser"
Linux video capture interface: v2.00
type=1400 audit(1414610839.616:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=482 comm="apparmor_parser"
type=1400 audit(1414610839.616:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=482 comm="apparmor_parser"
type=1400 audit(1414610839.616:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=482 comm="apparmor_parser"
type=1400 audit(1414610839.616:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=482 comm="apparmor_parser"
uvcvideo: Found UVC 1.00 device HP TrueVision HD (064e:e258)
fbcon: inteldrmfb (fb0) is primary device
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver btusb
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
iwlwifi 0000:02:00.0: loaded firmware version 41.28.5.1 build 33926 op_mode iwldvm
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN, REV=0x84
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HP TrueVision HD as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.5/1-1.5:1.0/input/input10
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
input: HP WMI hotkeys as /devices/virtual/input/input9
i2400m_usb 1-1.4:1.0: WiMAX interface wmx0 (64:d4:da:6c:d4:5f) ready
[drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[drm:intel_enable_lvds] *ERROR* timed out waiting for panel to power on
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
acpi device:33: registered as cooling_device5
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input11
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 51 for MSI/MSI-X
mute LED gpio 1 polarity 0
autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Internal Mic=0x11
Mic=0xa
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
init: failsafe main process (718) killed by TERM signal
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
init: cups main process (833) killed by HUP signal
init: cups main process ended, respawning
audit_printk_skb: 15 callbacks suppressed
type=1400 audit(1414610845.468:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=957 comm="apparmor_parser"
type=1400 audit(1414610845.468:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=957 comm="apparmor_parser"
type=1400 audit(1414610845.468:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=957 comm="apparmor_parser"
type=1400 audit(1414610845.468:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=957 comm="apparmor_parser"
type=1400 audit(1414610845.468:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=957 comm="apparmor_parser"
type=1400 audit(1414610845.468:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=956 comm="apparmor_parser"
type=1400 audit(1414610845.468:23): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=956 comm="apparmor_parser"
type=1400 audit(1414610845.468:24): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=957 comm="apparmor_parser"
type=1400 audit(1414610845.468:25): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=956 comm="apparmor_parser"
type=1400 audit(1414610845.472:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/freshclam" pid=960 comm="apparmor_parser"
init: samba-ad-dc main process (916) terminated with status 1
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x2ee offMax=0xfd5
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.3.10_Ubuntu (interface 0x001a0007).
vboxpci: IOMMU not found (not registered)
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process (2484) terminated with status 1
init: plymouth-upstart-bridge main process ended, respawning
i2400m_usb 1-1.4:1.0: boot-mode cmd 2: error waiting for an ack: -4
i2400m_usb 1-1.4:1.0: fw i6050-fw-usb-1.5.sbcf: section #145 (@286180 2048 B) failed -4
i2400m_usb 1-1.4:1.0: fw i6050-fw-usb-1.5.sbcf: download failed: -4
i2400m_usb 1-1.4:1.0: i6050-fw-usb-1.5.sbcf: cannot use: -4, skipping
i2400m_usb 1-1.4:1.0: Could not find a usable firmware image
i2400m_usb 1-1.4:1.0: cannot bootstrap device: -4
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
i2400m_usb 1-1.4:1.0: cannot setup device: -4
i2400m_usb: probe of 1-1.4:1.0 failed with error -4
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
usbcore: registered new interface driver i2400m_usb
r8169 0000:04:00.0 eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
ACPI : EC: GPE storm detected(12 GPEs), transactions will use polling mode
wlan0: authenticate with 28:32:c5:19:e6:18
wlan0: send auth to 28:32:c5:19:e6:18 (try 1/3)
wlan0: authenticated
wlan0: waiting for beacon from 28:32:c5:19:e6:18
wlan0: associate with 28:32:c5:19:e6:18 (try 1/3)
wlan0: RX AssocResp from 28:32:c5:19:e6:18 (capab=0x411 status=0 aid=3)
wlan0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
audit_printk_skb: 126 callbacks suppressed
type=1400 audit(1414610874.636:69): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=3896 comm="apparmor_parser"
type=1400 audit(1414610874.636:70): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3896 comm="apparmor_parser"
type=1400 audit(1414610874.640:71): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=3896 comm="apparmor_parser"
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: FLUSH CACHE EXT
ata2.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 6
res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/100
ata2.00: retrying FLUSH 0xea Emask 0x4
ata2.00: device reported invalid CHS sector 0
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x7fff9fff SErr 0x0 action 0x6 frozen
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/a8:00:20:02:33/02:00:2c:00:00/40 tag 0 ncq 348160 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/20:08:c8:04:33/02:00:2c:00:00/40 tag 1 ncq 278528 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/e8:10:e8:06:33/01:00:2c:00:00/40 tag 2 ncq 249856 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/d8:18:d0:08:33/02:00:2c:00:00/40 tag 3 ncq 372736 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/68:20:a8:0b:33/02:00:2c:00:00/40 tag 4 ncq 315392 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/58:28:10:0e:33/02:00:2c:00:00/40 tag 5 ncq 307200 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/08:30:68:10:33/03:00:2c:00:00/40 tag 6 ncq 397312 out
res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/e0:38:00:1b:33/01:00:2c:00:00/40 tag 7 ncq 245760 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:40:70:13:33/03:00:2c:00:00/40 tag 8 ncq 393216 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/48:48:70:16:33/02:00:2c:00:00/40 tag 9 ncq 299008 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/48:50:b8:18:33/02:00:2c:00:00/40 tag 10 ncq 299008 out
res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/60:58:e0:21:33/02:00:2c:00:00/40 tag 11 ncq 311296 out
res 40/00:fe:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/e0:60:40:24:33/01:00:2c:00:00/40 tag 12 ncq 245760 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/c0:78:48:94:2e/02:00:2c:00:00/40 tag 15 ncq 360448 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/e0:80:10:9b:2e/03:00:2c:00:00/40 tag 16 ncq 507904 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/68:88:f0:9e:2e/02:00:2c:00:00/40 tag 17 ncq 315392 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:90:00:a4:2e/04:00:2c:00:00/40 tag 18 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:98:00:ac:2e/04:00:2c:00:00/40 tag 19 ncq 524288 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/70:a0:c8:ab:30/01:00:2c:00:00/40 tag 20 ncq 188416 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/b8:a8:d8:00:31/01:00:2c:00:00/40 tag 21 ncq 225280 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/a0:b0:48:00:32/01:00:2c:00:00/40 tag 22 ncq 212992 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/d8:b8:88:51:32/01:00:2c:00:00/40 tag 23 ncq 241664 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/c0:c0:80:71:32/01:00:2c:00:00/40 tag 24 ncq 229376 out
res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/80:c8:20:f7:32/02:00:2c:00:00/40 tag 25 ncq 327680 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/a8:d0:e0:1c:33/02:00:2c:00:00/40 tag 26 ncq 348160 out
res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/58:d8:88:1f:33/02:00:2c:00:00/40 tag 27 ncq 307200 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/b0:e0:a0:f9:32/02:00:2c:00:00/40 tag 28 ncq 352256 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/e0:e8:50:fc:32/02:00:2c:00:00/40 tag 29 ncq 376832 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/f0:f0:30:ff:32/02:00:2c:00:00/40 tag 30 ncq 385024 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: COMRESET failed (errno=-16)
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/100
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
sd 1:0:0:0: [sda] Unhandled error code
sd 1:0:0:0: [sda]
Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
sd 1:0:0:0: [sda] CDB:
Write(10): 2a 00 2c 2b 34 00 00 04 00 00
end_request: I/O error, dev sda, sector 741028864
EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 23083511 (offset 0 size 524288 starting block 92628736)
Buffer I/O error on device sda1, logical block 92628352
Buffer I/O error on device sda1, logical block 92628353
Buffer I/O error on device sda1, logical block 92628354
Buffer I/O error on device sda1, logical block 92628355
Buffer I/O error on device sda1, logical block 92628356
Buffer I/O error on device sda1, logical block 92628357
Buffer I/O error on device sda1, logical block 92628358
Buffer I/O error on device sda1, logical block 92628359
Buffer I/O error on device sda1, logical block 92628360
Buffer I/O error on device sda1, logical block 92628361
sd 1:0:0:0: [sda] Unhandled error code
sd 1:0:0:0: [sda]
Result: hostbyte=DID_OK driverbyte=DRIVER_TIMEOUT
sd 1:0:0:0: [sda] CDB:
Write(10): 2a 00 2c 2e 84 38 00 00 08 00
end_request: I/O error, dev sda, sector 741246008
EXT4-fs warning (device sda1): ext4_end_bio:317: I/O error -5 writing to inode 23083453 (offset 0 size 0 starting block 92655752)
ata2: EH complete
ACPI: \_SB_.PCI0: Bus check notify on hotplug_event_root
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
ACPI Error: [^^^PEG0.PEGP.DD02] Namespace lookup failure, AE_NOT_FOUND (20131115/psargs-359)
ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC0_._Q1D] (Node ffff8802440d7cd0), AE_NOT_FOUND (20131115/psparse-536)
perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata2.00: failed command: SMART
ata2.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 25
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/100
ata2: EH complete
ata2.00: exception Emask 0x0 SAct 0x40007fff SErr 0x0 action 0x6 frozen
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:00:d0:f8:78/04:00:2f:00:00/40 tag 0 ncq 524288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:08:d0:fc:78/04:00:2f:00:00/40 tag 1 ncq 524288 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:10:d0:00:79/04:00:2f:00:00/40 tag 2 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/30:18:d0:04:79/03:00:2f:00:00/40 tag 3 ncq 417792 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:20:00:08:79/04:00:2f:00:00/40 tag 4 ncq 524288 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:28:00:0c:79/04:00:2f:00:00/40 tag 5 ncq 524288 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/d0:30:00:10:79/00:00:2f:00:00/40 tag 6 ncq 106496 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:38:d0:10:79/04:00:2f:00:00/40 tag 7 ncq 524288 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:40:d0:14:79/04:00:2f:00:00/40 tag 8 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:48:d0:18:79/04:00:2f:00:00/40 tag 9 ncq 524288 out
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:50:d0:1c:79/04:00:2f:00:00/40 tag 10 ncq 524288 out
res 40/00:01:00:00:00/00:00:00:00:00/40 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:58:d0:20:79/04:00:2f:00:00/40 tag 11 ncq 524288 out
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:60:d0:24:79/04:00:2f:00:00/40 tag 12 ncq 524288 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:68:d0:28:79/04:00:2f:00:00/40 tag 13 ncq 524288 out
res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/60:70:d0:2c:79/02:00:2f:00:00/40 tag 14 ncq 311296 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2.00: failed command: WRITE FPDMA QUEUED
ata2.00: cmd 61/00:f0:d0:f4:78/04:00:2f:00:00/40 tag 30 ncq 524288 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata2.00: status: { DRDY }
ata2: hard resetting link
ata2: link is slow to respond, please be patient (ready=0)
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: configured for UDMA/100
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2.00: device reported invalid CHS sector 0
ata2: EH complete